|
SIMET
|
Stamper for Stand Alone and System Integration operations Marking Area 80 x 50 mm Operates with PC only for SET-UP and for JOB programming |
PRODUCT CONFIGURATION:
| HEAD TES-T8 | Marking Head, Stand-alone or for System integration application |
|
BOX-T |
Controller |
| KIT-FN1 |
Pneumatic KIT (air filter, regulator, lubricator) |
| SW-FD-T |
Floppy Disk Program for Series T markers |
| CAV-ALI-1 |
Power Cable, 1.5 meters long |
| CAV-SER-T |
Serial Cable for Series T Marker, 5 meters long |
| CAV-TB-T-3 |
Connection cable between CONTROLLER and HEAD for Series T Markers (3 meters long) |
|
MAN-T |
Installation manual (internal-use manual in multiple languages) |
|
STYLUS (NON INCLUDED) |
Stylus Kit – Additional – see Main Option |
SPECIFICATIONS:
| HEAD WEIGHT | 12.5 Kg (BOX weight: 4.5 Kg) |
| WORK AREA | 80 x 50 mm (0.025 mm per step on each axis) high-quality, high-strength |
| ELECTRICAL POWER | 110-230 VAC (50/60Hz) (150 W) Head power supply is low-voltage and insulated. |
| AIR SUPPLY | 6 BAR max (typical consumption: 30 N/L1’) with clean, dry air |
| PC (not included) | Recommend: Pentium 8 MB RAM, Windows 95/98 (1 serial port for the marker) |
| OPERATION | PC required only for SET-UP and for marker JOB programming |
| DATA STORAGE | Buffered, internal in the BOX (max. capacity 390 KB) |
|
CLOCK |
Internal in the BOX (for automatic data updates) |
| MARKINGS |
Text, Dates, Counting, drawings, PLT imported from CAD, Pause, I/O management, aux. |
| MEASUREMENT UNITS | mm, inch, Bar |
| MARKING SPEED | 5 characters per second max. (depending on parameters) |
|
MOVEMENT SPEED |
Programmable from 1 to 200 mm/sec in steps of 1 mm |
|
STYLUS FREQUENCY |
Programmable from 10 to 150 Hz in steps of 5 Hz |
| STYLUS FORCE | 700 Kg max per dot with 3-mm stylus, 2000 Kg max per dot with 6-mm stylus |
| LANGUAGES | 5 Resident (ITALIAN, ENGLISH, FRENCH, GERMAN, SPANISH) |
|
FONT |
4 resident (ISO- DIN- UNIVESAL- MATRIX 5X7) (+ other optional fonts) |
|
I/O |
8 input + 8 output: opto-insulated plus aux power supply: 24 VDC 100W |
|
STANDARD I/O ( 24 VDC ) | Remote I/O, Start, Stop, FM, OK |
| I/O THIRD AXIS | Logic commands for third axis |
MAIN OPTIONS:
| NASSY-L60N |
Stylus Kit, standard, 3 mm diameter, 60° |
|
NASSY-LX |
Stylus Kit, extended, 3 mm diameter |
| NASSY-L90N |
Stylus Kit, model, 3 mm diameter , 90° |
| NASSY-H90 |
Stylus Kit, standard, 6 mm diameter, 90° |
| NASSY-H120 |
Stylus Kit, standard, 6 mm diameter , 120° |
| RC |
Remote control with: Start, Stop, Cycle, OK |
| RC-P |
Remote control with: Start, Stop, Cycle, OK, PWM |
| RC-PN |
Remote control with: Start, Stop, Cycle, OK, PWM, 255 programs |
|
FONT-XXXX |
Optional available fonts (OCR) |
| MF-10 |
Manual column |
| MF-10L |
Manual column, wide base |
| COM-3M |
Manual column, 3 axes (Z-axis manual) |
| RF-1 |
Rotary Fixture for cylindrical marking. Inertia 25 Kgcm2 |
| RF-4 |
Rotary Fixture for cylindrical marking. Inertia 10000 Kgcm2 |
|
PF-SSM |
Automatic column with programmable Z-axis |