SIMET PMS-V130-HP | Stand-alone
Bench-top Stamper with high performances Marking Area 130 x 100 mm |
PRODUCT CONFIGURATION :
| PMS-V130-HP | Stamper with Digital Visualization of Pressure + Integrated Pressure Regulator + RS232 |
| SISM Software | Floppy Disk Program with Graphic Interface and Complex Functions (see Product card) |
| MF-S |
Light Column/Base |
| FIL-P1 |
20 um Air Filter |
| CAV-ALI-1 |
1.5 m Power Cable |
| CAV-SER-S |
Serial Cable Stamper/PC |
| MAN-S |
Operator Manual |
| NEEDLE (Not included) | Option Needle Assembly ( choice depending on job) see Main Options |
SPECIFICATIONS :
| MARKING AREA | X axis = 130 mm, Y axis= 100 mm (Resolution = 0.025 mm per step) |
| DIMENSION |
Width= 246 mm, Heigth= 310 mm, Depth= 235 mm (without colummn and base) |
|
WEIGTH |
17 Kg (with column and base) |
| PROTECTIONS |
Sliding shutter for Mechanics |
| POWER REQUIREMENTS | 90 - 264 Vac ( 50/60HZ ) 40 W |
|
PNEUMATIC REQUIREMENTS |
7 Bar max. ( consumption 10N/L1 ) dry and not lubricated air |
|
DISPLAY |
LCD Back lit ( 2 lines, 40 characters ) |
| KEYBOARD |
60 alphanumeric keys with multifunctions |
| OPERATION | STAND ALONE (no PC required) , preset parameters and easy-to-follow guide |
| SERIAL INTERFACE | RS232 |
| I/O INTERFACE | I/O connection to PLC ( Start End marking ) |
|
STANDARD JOBS |
Linear and circular Texts, Dates, Serializations + Internal Drawings, PLT files, Pause, Production Management |
| STANDARD MEASUREMENT UNIT | mm, inch, Bar , PSI, Mpa |
| MARKING SPEED | Max 150 mm/sec: about 4-5 characters/sec in relation to parameters |
| DOTS DENSITY | Programmable from 0,1 to 2 mm in step of 0,1 mm ( max. 100 dots/cm ) |
| MEMORY |
512Kb ( MAX 100 memories ) |
| MARKING FORCE | Max . 1000 Kg per dot |
| MULTILANGUAGES |
5 resident ( Italiano English Francais Deutch - Espanol ) |
|
FONT |
18 resident |
| I/O STANDARD 24 VDC (non insulated ) | Front face : Start Stop Keys , LED for Power Ready - Cycle Remotables : Start Stop Ready Cycle End marking |
MAIN OPTIONS :
| Optional functions with SISM | SW-NET Simet Network program - Report |
|
Optional functions with the Stamper | Connection to Bar Code Scanner |
|
RC |
Remote control with START STOP keys + Ready and Cycle lamps |
|
BOX-232/485 |
BOX to interface PC to Stampers in SW-NET Network |
|
NASSY-L60N |
Needle Assembly 3 mm diameter |
| NASSY-L-90N |
Needle Assembly 3 mm diameter |
| NASSY-LX |
Long Needle Assembly 3 mm diameter |
| NASSY-H90 |
Heavy Needle Assembly 6 mm diameter |
| NASSY-H120 |
Heavy Needle Assembly 6 mm diameter |
| NASSY-6D |
Diamond Needle Assembly to mark surfaces up to 80 HRc hardness |