SIMET PMS-V80 | Stamper
for System Integrators and On-line applications (Without PC) Marking Area 80 x 50 mm |
PRODUCT CONFIGURATION :
| BOX BOX-V80 | Control Box for SYSTEM INTEGRATORS Stampers |
|
MARKING HEAD TES-V80 |
Marking Head for Model PMS-V80 ( 80 x 50 mm ) |
|
SOFTWARE SISM |
Floppy Disk Program with Graphic Interface and complex functions (see Product Card) |
| KIT PNEU-1 | Pressure KIT with " Pressure Regulator – 20 um Filter - Mechanic Gauge |
| CAV-ALI-1 |
1.5 m Power Cable |
| CAV-TB-20 |
BOX / HEAD Cable ( 20 m long) |
| MAN-S |
Operator manual |
| STYLUS (NOT INCLUDED) | Optional Needle Assembly ( choice depending on jobs ) see Main Option |
SPECIFICATIONS :
| MARKING AREA | X axis = 80 mm Y axis = 50 mm ( Resolution 0,025 mm per step ) |
| PROTECTION |
Sliding Shutter Assembly |
| POWER REQUIREMENTS | 90 - 264 Vac ( 50/60HZ ) 30 W |
|
PNEUMATIC REQUIREMENTS |
7 Bar max. ( consumption 20N/L1’ ) Clean,dry air |
|
DISPLAY |
LCD Back lit ( 2 lines, 40 characters ) |
| KEYBOARD | 60 alphanumeric keys with muiltifunctions |
|
OPERATION |
STAND ALONE (no PC required) , preset parameters and easy-to-follow guide |
|
SERIAL INTERFACE |
RS232 |
| SERIAL STANDARD FUNCTIONS | All SISM functions (see SISM card) |
|
I/O INTERFACE |
I/O connection to PLC ( Start – End marking ) |
|
STANDARD JOBS |
Linear and circular Texts, Dates, Serializations + Drawings, PLT Files, Pause, 18 Fonts, Prod. Ma |
| STANDARD MEASUREMENT UNIT | mm, inch, Bar , PSI, Mpa |
| MARKING SPEED | 4 characters/sec ( depending on parameters ) |
|
DOT DENSITY |
Programmable from 0,1 to 2 mm in step of 0,1 mm ( max. 100 dots/cm ) |
| MEMORY |
512Kb ( MAX 100 memories ) |
| MARKING FORCE | Max . 2000 Kg per dot |
| MULTILANGUAGES |
5 resident ( Italiano – English – Francais – Deutch - Espanol ) |
|
FONTS |
18 resident |
| I/O STANDARD 24 VDC (non insulated ) | Remote : Start – Stop – Ready – Cycle – End marking |
MAIN OPTIONS :
| PROTOCOL for System Integrators | Simplified Protocol for System Integrators, with macroinstructions |
|
SISM Functions |
NET SIMET Network - Report |
| Stamper Functions | Bar Code Reader Connection |
|
OCX Software |
Program to develop CUSTOM Interfaces |
| RC |
Remote Control with START – STOP keys + Ready and Cycle lamps |
|
CAV-TB-40 |
40 m BOX / HEAD Cable |
| BOX-232/485 |
BOX to interface PC to Stampers in NET SIMET network |
|
NASSY-L60N |
Needle Assembly 3 mm diameter |
| NASSY-L90N |
Needle Assembly 3 mm diameter |
| NASSY-LX |
Long Needle Assembly 3 mm diameter |
| NASSY-H90 |
Heavy Needle Assembly 6 mm diameter |
| NASSY-H120 |
Heavy Needle Assembly 6 mm diameter |
| NASSY-6D |
Diamond Needle Assembly to mark surfaces up to 80 HRc hardness |